iPhone OS 4 » Jailbreak

Jailbreak iOS 4.0.1 for iPhone 4, iPhone 3GS, and iPhone 3G

Hans — Thu, 15 Jul 2010 22:07:52 +0000

You can jailbreak iOS 4.0.1, despite the new iOS 4.0.1 update Apple released today. It appears that the redsn0w 0.9.5 beta 5 software works on iPhone 3GS, and iPhone 3G. You currently cannot jailbreak iOS 4.0.1 on iPhone 4 yet.

First get the iOS 4.0.1 download, and then see the iOS 4.0.1 jailbreak post.

The iOS 4.0.1 jailbreak is easy to perform. If you are on iPhone 4, you will just have to wait for the iOS 4.1 jailbreak to come out.

Download blacksn0w for iPhone 3G/3GS 3.1.2

Hans — Tue, 03 Nov 2009 17:22:59 +0000

Geohot has decided to release his blacksn0w iPhone 3G and iPhone 3GS unlock software today instead of November 4. It can be installed directly through blackra1n RC3. In this page I will show you how you can get blacksn0w on your iPhone.

WARNING

Apple can permanently patch the blacksn0w exploit in their next firmware update, please subscribe to our free newsletter and remember to check the latest news here before updating your iPhone.
You must download Cydia’s “On File” system in case Apple blocks more exploits in future updates. We will post a guide on how to do this later, but for now you can still continue following this tutorial.
* If you have a “No WiFi” problem after following this tutorial, go to Settings – > General -> Reset and tap on Reset Network Settings. That should solve any WiFi issues you have.
If you are using T-Mobile you must go to Settings -> General -> Network and slide the Enable 3G button to Off.

blacksn0w Tutorial

1. Download our free iUserbar toolbar (currently down, we will link to another download on July 6, 2010) and install it.

2. Click the Downloads button and click on the blackra1n RC3 link to download it.

3. Connect your iPhone to your computer and open the blackra1n application.

4. Click the make it ra1n button.

5. blackra1n will now put your iPhone in to recovery mode and display the above image of Geohot. While in recovery mode, blackra1n will jailbreak your device.

6. Once blackra1n is done jailbreaking, your iPhone will reboot and you should see the blackra1n icon on your iPhone or iPod touch screen.

7. Tap the blackra1n icon to open it. Tap on Cydia, Rock, and blacksn0w and then click the Install button to install them.

8. Once you’ve installed the applications, restart your iPhone. To do that, just hold down the top button until the Slide to power off message appears. Slide the button, and wait for your device to turn off. Turn on your device and you should now see the applications you selected on your iPhone.

Credit goes to Geohot for this jailbreak!

What now?

Congratulations, you have successfully unlocked your iPhone, now you can use your iPhone with other carriers! If you live in the US the only other carrier you can use your iPhone with is T-Mobile. Your unlock is nt permanent, and Apple will try to push updates to block it. We will always stay one step ahead and post a guide on how to safely update your iPhone without having your unlock compromised, so please subscribe to our newsletter and download our free iPhone OS 3 toolbar for important updates and downloads.

Jailbreak iPhone 3.1.2 firmware with Pwnage Tool 3.1.4

Hans — Mon, 26 Oct 2009 22:32:40 +0000

The Dev Team released verison 3.1.4 of their own jailbreaking software called PwnageTool. With PwnageTool, you can create a custom jailbroken IPSW file and restore it through iTunes. You can already easily jailbreak iPhone 3.1.2 using blackra1n for Windows/Mac, but Pwnage Tool is required for iPhone users that want to keep their iPhone unlock. Apple has updated the modem firmware/baseband and the latest one fixes the iPhone unlock exploit. Downgrading is not possible, so iPhone users must update to iPhone 3.1.2 firmware by creating a custom firmware file and then restoring it through iTunes. PwnageTool works with the iPod touch as well. PwnageTool is only available for Mac.

WARNING

PwnageTool is compatible with all iPhones and the iPod touch first generation and only iPod touch 2nd generation devices that were already jailbroken before. If you have an iPod touch 3rd generation, you cannot use PwnageTool.
If you recently purchased an iPhone 3GS, the jailbreak may or may not work. I recommend you try blackra1n (1-click jailbreak) to see if you can jailbreak.

PwnageTool 3.1.4 Download links

Download PwnageTool 3.1.4 for Mac

PwnageTool 3.1.4 Tutorial

1. Connect your iPhone or iPod Touch to your PC and then open the PwnageTool application. If you don’t have iTunes then go to this link and download iTunes.

2. Select your device by clicking on it and then click the white arrow to continue.

3. PwnageTool will now attempt to find the IPSW file for your iPhone. If you haven’t downloaded it already, then download it now from here:

iPhone 3.1.2 download (iPhone1,1_3.1.2_7D11_Restore.ipsw, 241 MB)
iPhone 3G 3.1.2 download (iPhone1,2_3.1.2_7D11_Restore.ipsw, 242 MB)
iPhone 3GS 3.1 download (iPhone2,1_3.1.2_7D11_Restore.ipsw, 306 MB)

(Right-click and save to your PC. Do not use Safari to download this because Safari will download this as a .zip file)

4. Once PwnageTool has found your IPSW file it will show it on the screen. Click it and click the arrow to continue.

5. PwnageTool will ask you the following: “We will now create an .ipsw file that you can use to restore your iPhone 3G(S) with iTunes. This file will be placed on your desktop. Do you want to continue?” Just click on the Yes button.

6. PwnageTool will now show this message if you have an iPhone 3GS: “Do you have an iPhone 3G(S) contract that would normally activate through iTunes?” If you are using an unlocked iPhone, then click on the No button to continue. If you click Yes, then PwnageTool will create an IPSW with an updated baseband which will not be able to unlock your iPhone 3GS device on the current 05.11.07 modem firmware (baseband).

7. PwnageTool will now start the Building IPSW process. It will also ask you to enter in your password in the middle of it, just enter in the username and password for your Mac and click OK.

8. Once the Building IPSW process is complete, PwnageTool will show the following message: “Has your iPhone 3G(S) been Pwned before (does it have the pineapple logo)? If you are unsure click No.” Just click on No.

9. PwnageTool will now put your device in to recovery mode so you can restore the custom IPSW file to your device.

10. Once your device is in recovery mode, open iTunes and press option on your keyboard and at the same time click on Restore in iTunes. Select the IPSW file that has the name Custom_Restore.ipsw in it and click Choose.

11. iTunes will now restore the custom firmware to your device. Once it’s restored, you can open your device and see the Cydia and Icy app on there. That’s all there is to it!

Credit goes to Dev Team for this jailbreak!

What now?

Congratulations, you have successfully jailbroken your iPhone or iPod Touch, give yourself a pat on the back! Now you have access to a lot more applications and modifications that you will never see in the App Store. We will be covering a lot of cool jailbreak apps in future posts, please subscribe to our newsletter if you found this tutorial helpful. If you liked this, feel free to pass on this information to people you know!

Jailbreak iPhone 3.1.2 firmware with blackra1n

Hans — Thu, 15 Oct 2009 02:27:08 +0000

Geohot recently released his new jailbreaking software called blackra1n. blackra1n allows you to jailbreak iPhone 3.1.2 or iPod touch with just a click of a button. Follow the guide below to learn how to use blackra1n and jailbreak your device.

WARNING

If you want to keep your software unlock on the iPhone, you should not use blackra1n. You will need to use PwnageTool instead, which preserves your baseband and helps you update without loosing your unlock.
blackra1n is supported on all iPhones, and iPod touches running on iPhone OS 3.1.2 firmware except for the iPod touch 3rd generation 8 GB (model MC). What that means is that if you brought an iPod touch after September 9 and the Model # on the back has “MC“, you cannot jailbreak it with blackra1n. If you try to do that, then you will need to restore your iPod touch! Update: The latest blackra1n supports all devices, the newer iPod touch and iPhone 3GS will be tethered, meaning you will need to connect your device to your computer and run blackra1n again every time you reboot.

blackra1n Download links

Scroll down to the bottom of the page and click either the Windows logo to download blackra1n for Windows, or click the Apple logo to download blackra1n for Mac.

Download blackra1n for Windows/Mac (currently down, we will link to another download on July 6, 2010)

blackra1n Tutorial

1. Connect your iPhone or iPod touch to your computer and open the blackra1n application.

2. Click the make it ra1n button.

3. blackra1n will now put your iPhone or iPod Touch in to recovery mode and display the above image of Geohot. While in recovery mode, blackra1n will jailbreak your device.

4. Once blackra1n is done jailbreaking, your iPhone or iPod Touch will reboot and you should see the blackra1n icon on your iPhone or iPod touch screen.

5. Tap the blackra1n icon to open it. You have the option of installing either Cydia, Icy, or Rock. Select the applications you would like to install and then click the Install button to install them.

6. Once you’ve installed the applications, restart your iPhone or iPod touch. To do that, just hold down the top button until the Slide to power off message appears. Slide the button, and wait for your device to turn off. Turn on your device and you should now see the applications you selected on your iPhone or iPod Touch.

Credit goes to Geohot for this jailbreak!